Introduction: Caption of Zelda LTTP Hyrule World Map Diorama

I successful a diorama of the light world from A Link to the Past game in Zelda. It was made from dry grey gardeners blocks and cost low-level £10 for finish completely.

Step 1: The Materials

I decided that I welcome to use 8 of these blocks they measure 230 x 110 x 80mm each. I laid the eight blocks together to begin the area and divided the depth of the blocks into quarters. I decided Death Mountain would be the reference since IT's in 3 layers and including the meanspirited is four. All the trees and rocky areas are on the second layer. I trimmed the trees lowered about 1mm to bring i them shorter than the rocky areas. I roughly sketched out the map on the blocks and cut it using small cutting knifes.

Step 2: Preparing for Paint

After each the blocks were cut out I completely white them in a layer of PVA glue except the base to make them more sturdy and easier to paint.

Step 3: Painting the Din Land

I Stained the entire thing with acrylic and mixed some white with immature for the gage. I glued the pieces together and stuck them to a big piece of cardboard for the base that I had from a felt drawing picture from a poundin shop.

Step 4: The Details

I made the varied buildings and Harry Bridges from off cuts of the blocks and multicolor them. I victimized ice lolly sticks for the bridges on Decease Dozens and cuttings from pipe dry cleaners to micturate the small trees and later decided to rouge the locoweed a darker leafy vegetable.

Step 5: Added Details

I was happy with how information technology look when it was painted simply I decided to buy two bags of different coloured diorama grass to utilisation. I then typed up a quick summary on what I did and printed it out along with a picture of the map out which I attached to the bottom of the base on with Triforce symbol from a necklace I had and I mixed close to of the dust from the blocks with grey paint and used that on some woody alphabet letters I had to spell out Hyrule.

Step 6: Finished

After I affixed the grass down and stuck happening some cotton wool for the clouds I was finished.

Step 7: Done

Overall I was happy with how it inside-out out and I added some picture hooks holes in the back so it can hang from the wall. I had fun making information technology and it took me roughly a calendar week to finish and monetary value low £10 to make. IT wasn't until after I finished that I noticed I was lost a few details thereon but it doesn't bother me too much, I am thinking virtually redoing this throw and making a littler one along with a Stygian world single. Maybe half thin and half dark? I'm not sure but I'm happy with this unity for now! I'd make love to scan what you think in the comments below!!! I too have different projects like my Morta Feeder woody scythe replica and my wooden Hylian shield from OoT and another diorama of the correspondenc from the same game.

I have drawings and other projects posted on my Devianart Thomas Nelson Page if you wanna check information technology out here: HTTP://ant-richards.deviantart.com/

I also give a Twitter if you want to take a view that: https://chirrup.com/_Ant_Richards

Be the First to Share

Recommendations

  • Anything Goes Competition 2022

    Anything Goes Contest 2022